Futurebatt DSC Impassa Battery
3.6Editor score
7.2V rechargeable power
Impassa 9057 compatibility
Multiple electrical protections
In this guide
A security panel battery is only useful when its voltage, capacity, chemistry, connector, and physical dimensions match the equipment it powers. The best replacement for an ADT Command Smart Security Panel therefore depends on the exact panel model and original battery part number, not merely on a broad ADT label.
This guide compares ten replacement options using the listed voltage, capacity, chemistry, part numbers, supported systems, and installation details. It covers the ADT Command Smart Security Panel and several DSC Impassa and Honeywell Lynx batteries that are frequently confused with one another.
Each review explains the most relevant strengths, limitations, and ideal buyer. The top recommendations reflect compatibility and useful specifications, while current prices, ratings, availability, and warranty terms may change over time and should be confirmed before purchase.
Top 3 Picks for Best Battery Replacement for Adt Command Smart Security Panel
Cameron Sino ADT Command Battery
4.0Editor score
7800mAh lithium-ion capacity
Designed for Command panels
Explicit model matching guidance
NASTIMA ADT DSC Impassa Battery
4.3Editor score
7.2V 3700mAh capacity
Black two-prong connector
Detailed fit exclusions
Top 10 Best Battery Replacement for Adt Command Smart Security Panel in 2026 Compared
The table below compares all ten batteries by their stated chemistry, voltage, capacity, and panel or part-number compatibility. It is designed to make model mismatches easier to spot before ordering, especially where ADT Command, DSC Impassa, and Honeywell Lynx systems require different battery designs.
ProductsSpecificationsEditor scorePrice
Editor's Choice
Cameron Sino ADT Command Battery
3.7V lithium-ion chemistry
7800mAh rated capacity
ADT Command compatibility
68.8 by 55.4mm
4.0Editor score
Editor's Choice
Ni-MH 3600mAh ADT System Battery
7.2V Ni-MH chemistry
3600mAh rated capacity
SCW9057 system support
6PH-H-4/3A3600-S-D22
4.4Editor score
Best Premium
DSC 3600mAh ADT Battery
7.2V Ni-MH chemistry
3600mAh rated capacity
SCW9057G-433 support
Two part-number references
4.2Editor score
DSC Impassa 7.2V Battery
7.2V Ni-MH chemistry
3600mAh rated capacity
One-pack configuration
Six-cell construction
4.8Editor score
ZZcell DSC Impassa Battery
7.2V Ni-MH chemistry
3600mAh rated capacity
DSC Impassa 9057 support
ISO 9001 certification
4.1Editor score
NASTIMA ADT DSC Impassa Battery
7.2V Ni-MH chemistry
3700mAh rated capacity
Black two-prong plug
101 by 69mm
4.3Editor score
Honeywell Lynx Replacement Battery
7.2V Ni-MH chemistry
3600mAh rated capacity
Honeywell Lynx support
Three-prong connector
4.7Editor score
Futurebatt DSC Impassa Battery
7.2V rechargeable voltage
28.8Wh energy rating
Impassa 9057 support
Short-circuit protection
3.6Editor score
DSC Impassa 3600mAh Battery
7.2V Ni-MH chemistry
3600mAh rated capacity
SCW9057G-433 support
Matching compartment dimensions
5.0Editor score
17000152 Impassa Battery
7.2V Ni-MH chemistry
3600mAh rated capacity
25.92Wh energy rating
101 by 69.2mm
4.8Editor score
1. Cameron Sino ADT Command Battery – Best Overall Battery Replacement for Adt Command Smart Security Panel
Cameron Sino ADT Command Battery
3.7V lithium-ion voltage
7800mAh rated capacity
68.8 by 55.4mm
18.8mm pack thickness
This Cameron Sino replacement is the only product in the list expressly described as a battery for the ADT ADT5AIO, ADT7AIO, and Command Smart Security Panel. Its stated 3.7V lithium-ion configuration and 7800mAh capacity make it the most directly relevant choice for shoppers searching by the exact product family in the query. It is especially useful when the original battery label identifies one of those Command models.
Pros
- Explicit Command panel support
- High stated battery capacity
- Multiple certification claims
- Clear model matching reminder
- Long warranty stated
Cons
- No published customer rating
- Lithium-ion differs from Ni-MH
- Exact connector match still required
We may earn a commission when you buy through this link, at no additional cost to you.
The standout feature is the specificity of its compatibility information. Instead of relying on a generic ADT name, the product references the applicable ADT panel models and tells buyers to match both the device model and battery part number before buying. The listed dimensions of approximately 68.80 by 55.40 by 18.80mm also give buyers concrete measurements to compare with their existing pack. Certifications listed for the product include FCC, CE, CB, ISO 8075, and RoHS.
The main trade-off is that this is a lithium-ion battery rather than the 7.2V Ni-MH pack used by many other alarm systems in this roundup. A buyer with an ADT-branded DSC Impassa panel should not select it merely because the seller or panel carries an ADT label. Its 3.7V chemistry, 7800mAh figure, and dimensions need to be reconciled with the exact replacement part specified for the panel. The absence of a published rating also means there is no visible customer feedback to contextualize the stated specifications.
It remains the leading recommendation for a genuine ADT Command Smart Security Panel because it is the only option that directly names the relevant Command models. Buyers should remove the installed battery, photograph its label, and compare the model, voltage, dimensions, and connector before ordering. For owners of a DSC Impassa or Honeywell Lynx panel, the appropriate choice is farther down the list rather than this Command-specific battery.
Purpose-Built Command Panel Fit
The explicit support for ADT5AIO and ADT7AIO reduces guesswork for Command panel owners. It is more relevant than broad DSC or Honeywell compatibility because those systems use different battery designs.
Capacity and Certification Details
The stated 7800mAh capacity and listed FCC, CE, CB, ISO 8075, and RoHS certifications provide useful purchasing information. The manufacturer also states a 14-day money-back guarantee and a 914-month warranty, although current terms should be verified on the listing.
We may earn a commission when you buy through this link, at no additional cost to you.
2. Ni-MH 3600mAh ADT System Battery – Dependable Ni-MH Power for DSC Panels
Ni-MH 3600mAh ADT System Battery
7.2V Ni-MH voltage
3600mAh rated capacity
SCW9057 panel support
Rechargeable battery chemistry
This 7.2V, 3600mAh Ni-MH battery is intended for ADT SCW9057 and SCW9055 systems and is also described as a replacement for the DSC 9057 battery used in compatible panels. It carries a 4.4 customer rating, making it one of the better-reviewed products here. It is a relevant option for a DSC-based ADT system, but it should not be treated as a universal replacement for every ADT panel.
Pros
- Clear voltage and capacity
- Specific replacement part number
- Multiple protection features
- Rechargeable Ni-MH design
- Strong customer rating
Cons
- Not a Command panel match
- Compatibility limited by connector
- Installation should follow panel guidance
We may earn a commission when you buy through this link, at no additional cost to you.
The product information gives unusually useful identifiers. It names 6PH-H-4/3A3600-5-D22 as a compatible replacement and identifies 6PH-H-4/3A3600-S-D22 as the replacement battery part number. The listing also describes protection against overdischarge, overcurrent, and short circuits, plus a steady-voltage circuit. Because the chemistry is rechargeable Ni-MH, it offers a more conventional match for many DSC alarm-panel battery compartments than a lithium-ion pack.
Compatibility is the limitation that deserves the most attention. The product is for SCW9057, SCW9055, and compatible DSC alarm panels, not the ADT Command Smart Security Panel named in the search phrase. The plug shape, physical dimensions, and required charge cycle also need to match the equipment. Its stated support for Ni-MH rechargeability is useful, but a correct electrical specification alone does not guarantee that the connector or charging arrangement will be right.
Choose this battery if your installed ADT system is a SCW9057 or SCW9055 and the original pack carries the stated replacement part number. It is a sensible rechargeable Ni-MH choice for DSC Impassa owners and has a stronger visible rating than several alternatives. Command panel owners should confirm that their exact model and battery designation appear in the listing before proceeding.
Rechargeable Ni-MH Advantage
The Ni-MH chemistry is designed to be recharged, reducing routine battery waste. That makes it a practical match for alarm panels designed around a rechargeable internal battery rather than a replaceable alkaline cell.
Useful Part-Number Guidance
The listing supplies both compatible and replacement part numbers, making verification much more reliable than relying on a generic description. Comparing the printed label with those identifiers should precede purchase.
We may earn a commission when you buy through this link, at no additional cost to you.
3. DSC 3600mAh ADT Battery – Clear Compatibility for Wireless DSC Systems
DSC 3600mAh ADT Battery
7.2V Ni-MH voltage
3600mAh rated capacity
17000152 part number
SCW9057G-433 support
This replacement targets ADT-branded DSC wireless alarm panels and carries a 4.2 rating. Its specifications—7.2V, 3600mAh, and Ni-MH chemistry—place it in the same general battery class as other DSC Impassa replacements. The listing specifically names 6PH-H-4/3A3600-S-D22, 17000152, IMPASSA 9057, and ADT SCW9057G-433, giving shoppers several ways to verify the match.
Pros
- Two recognized part numbers
- Clear 9057G compatibility
- Protective electrical features
- Rechargeable battery design
- Positive customer rating
Cons
- Wrong chemistry for Command model
- Requires connector verification
- Generic brand identification
We may earn a commission when you buy through this link, at no additional cost to you.
A major strength is the breadth of recognizable identifiers in the product description. Someone who has removed the old battery and found either 17000152 or the longer 6PH-H designation can compare it directly with the listing. The stated overdischarge, overcurrent, short-circuit, and steady-voltage protections also make the product description suitably focused on the electrical demands of a security panel.
Its limitation is the same one that applies to many ADT-labeled DSC batteries: they are not automatically suitable for the ADT Command Smart Security Panel. Command models can use a different cell type, voltage, and enclosure. The information provided does not establish compatibility with ADT5AIO, ADT7AIO, or the Command panel battery used by the top-ranked product. A shopper could therefore make an expensive compatibility mistake if the product title's broad use of ADT were treated as sufficient evidence.
This is a solid choice for a compatible DSC wireless system, particularly an SCW9057G-433 installation whose original battery carries one of the listed part numbers. Its rating, specific identifiers, and protection features make it more informative than a generic replacement. Verify the connector and battery compartment before ordering, and do not use it for a Command panel unless the panel documentation explicitly confirms compatibility.
Multiple Ways to Verify Fit
Compatibility is tied to both a DSC part number and an ADT 17000152 reference. This gives buyers practical identifiers to compare with the battery label and system documentation.
Built-In Electrical Protections
The description identifies overdischarge, overcurrent, short-circuit, and stable-voltage safeguards. These claims are relevant because a replacement battery is expected to remain connected to charging circuitry and deliver dependable standby power.
We may earn a commission when you buy through this link, at no additional cost to you.
4. DSC Impassa 7.2V Battery – High-Rated One-Pack Replacement
DSC Impassa 7.2V Battery
7.2V Ni-MH voltage
3600mAh rated capacity
One pack configuration
Six individual cells
This one-pack replacement has a 4.8 rating, the highest visible rating among the ten products. It is designed for 7.2V DSC IMPASSA 9057 systems, including SCW9057, SCW-9055, and ADT SCW9057G-433 configurations. Its 3600mAh Ni-MH specification aligns with the common rechargeable battery format used in many compatible DSC wireless alarm panels.
Pros
- Highest visible product rating
- Detailed compatible model list
- Six-cell pack construction
- Rechargeable Ni-MH chemistry
- High stated capacity
Cons
- Not designed for Command panel
- Connector fit must be confirmed
- Single-pack configuration
We may earn a commission when you buy through this link, at no additional cost to you.
The detailed compatibility coverage and construction information are particularly useful. The listing identifies 17000152, the 6PH-H-4/3A3600-S-D22 part number, and several panel families. It also states that the pack is composed of six 3600mAh Ni-MH cells and is intended to replace the standard internal control-panel battery. That level of detail helps distinguish it from a loose assortment of similarly shaped cells without a purpose-built plug.
The trade-off is that the product is not a direct match for the ADT Command Smart Security Panel. Its 7.2V Ni-MH architecture is entirely different from the 3.7V lithium-ion specification of the Command-specific top pick. Furthermore, the 4.8 rating is based on a limited visible review count, so it should not be interpreted as proof of long-term compatibility or performance across every listed system. Physical connector and compartment fit still need confirmation.
For an owner of the listed DSC Impassa equipment, this is an excellent candidate based on its rating, clear model references, and high stated capacity. The one-pack format may also suit systems that use a single matching battery module. It is not the right choice merely because it says ADT; select it only after matching the panel model and original battery identifier.
Strong Customer Feedback
The visible 4.8 rating makes this one of the most positively reviewed products in the roundup. While the small number of underlying reviews still calls for measured expectations, the feedback is a favorable starting point.
Purpose-Built Internal Pack
The stated six-cell construction and 7.2V output provide useful details about the pack's design. These specifications help distinguish it from individual cells or unrelated alarm batteries.
We may earn a commission when you buy through this link, at no additional cost to you.
5. ZZcell DSC Impassa Battery – Certified Replacement for the 9057 Panel
ZZcell DSC Impassa Battery
7.2V Ni-MH voltage
3600mAh rated capacity
DSC Impassa 9057 fit
ISO 9001 certification
The ZZcell replacement is explicitly positioned for the DSC Impassa 9057 wireless control panel and carries a 4.1 customer rating. It lists the original part number 6PH-H-4/3A3600-S-D22, with a 7.2V Ni-MH configuration and 3600mAh capacity. The precise Impassa 9057 reference makes it more purposeful than a generic 7.2V alarm battery.
Pros
- Exact original part number
- Fresh domestic-shipped product claim
- Multiple certification claims
- Rechargeable Ni-MH design
- Established 4.1 rating
Cons
- No Command panel compatibility
- Limited visible customer feedback
- Connector needs independent verification
We may earn a commission when you buy through this link, at no additional cost to you.
Its strongest documented details concern replacement and certification. The product is described as fresh and brand new, shipped directly from the United States, and sourced from manufacturers of portable-device batteries. It also states compliance with the original manufacturer's specifications and lists ISO 9001, CE, and RoHS certifications. These points can give buyers more confidence that the pack is designed as a complete panel battery rather than a collection of loose cells.
The product is not described as fitting the ADT Command Smart Security Panel, so it should be treated as an Impassa-specific option. Although both product families may appear within the same ADT installation, their voltage, chemistry, dimensions, and connectors can differ. The 4.1 rating is respectable, but the visible feedback is limited enough that buyers should still rely primarily on exact model matching rather than ratings alone.
Choose this battery for a DSC Impassa 9057 system when the removed battery bears the stated part number and the plug matches. Its exact compatibility language, certification details, and domestic-shipping claim make it a credible choice within that category. Command panel owners should instead use the explicitly Command-compatible battery in first position.
Exact 9057 Compatibility
The product description names the DSC Impassa 9057 and its original battery identifier. This specificity helps prevent the type of broad compatibility assumptions that can lead to an incorrect purchase.
Documented Certification Claims
ISO 9001, CE, and RoHS certifications are stated in the product information. Reviewers can compare these claims with the current listing and manufacturer documentation before installation.
We may earn a commission when you buy through this link, at no additional cost to you.
6. NASTIMA ADT DSC Impassa Battery – Higher-Capacity Option with Clear Exclusions
NASTIMA ADT DSC Impassa Battery
7.2V Ni-MH voltage
3700mAh rated capacity
Black two-prong connector
318g pack weight
The NASTIMA pack combines a 4.3 rating with a stated 7.2V, 3700mAh Ni-MH configuration. It supports ADT DSC IMPASSA 9057, SCW9055, SCW9057, BH7236-SS, 17000145, 17000152, and the 6PH-H-4/3A3600-S-D22 designation. It also states dimensions of 101 by 69 by 17mm and a weight of 318g, providing a useful basis for checking the battery compartment.
Pros
- Higher stated 3700mAh capacity
- Explicit connector identification
- Clear incompatible-system warning
- Multiple safety protections
- Thirty-five-day return offer
Cons
- Not a Command battery match
- Two-prong connector restriction
- Only one-year after-sale service
We may earn a commission when you buy through this link, at no additional cost to you.
What distinguishes this listing is its unusually explicit fit guidance. It identifies a black two-prong plug and directly says the battery does not fit 300-03866 Honeywell Lynx panels, including several Lynx Touch and ADT Ademco systems. It also tells buyers to compare voltage, size, and plug. This level of candor is especially useful in a category where many listings use broad ADT terminology and can obscure meaningful connector differences.
The stated 3700mAh capacity is higher than the 3600mAh common among several competing packs, although the chemistry remains the same Ni-MH family. Built-in protection against overcharging, short circuits, and high temperatures adds further reassurance. The product claims no cell memory effect, a 35-day money-back period, and one year of after-sale service. It is nevertheless not designed for the ADT Command Smart Security Panel, so its additional capacity does not make it a universal ADT solution.
This is the premium-oriented choice in the list for owners of a compatible DSC Impassa installation because of its higher stated capacity, precise measurements, and clear connector exclusions. It is also the most useful educational listing for avoiding a Honeywell mismatch. Confirm the model and plug before ordering, and choose the Cameron Sino battery if your equipment is specifically an ADT Command panel.
Higher Stated Energy Capacity
At 3700mAh, the pack claims slightly more capacity than the 3600mAh options in most of the list. That makes it attractive for compatible users who prioritize runtime, subject to the panel's charging behavior.
Exceptional Fit Warnings
The black two-prong description and explicit Honeywell exclusions reduce the risk of confusing incompatible alarm systems. Clear warnings are especially helpful when a battery shares the same broad voltage and capacity as a valid alternative.
We may earn a commission when you buy through this link, at no additional cost to you.
7. Honeywell Lynx Replacement Battery – Correct Choice for Lynx Systems
Honeywell Lynx Replacement Battery
7.2V Ni-MH voltage
3600mAh rated capacity
Three-prong connector
Honeywell Lynx support
This replacement serves Honeywell Lynx 5100, 5200, and 5210 systems and carries a 4.7 rating. It also lists Lynx Touch 5210, Lynx Touch 7000, Lyric Controller, Lyric Keypad LCP500-L, and JJJ WALYNX-RCHB-SHA compatibility. Its 7.2V, 3600mAh Ni-MH specifications look similar to many DSC batteries, but the connector design is the critical distinction.
Pros
- Strong 4.7 customer rating
- Broad Lynx model coverage
- Three-prong connector specification
- CE and RoHS certification
- Long backup stated
Cons
- Incompatible with DSC-style plugs
- No Command panel support
- Exact panel model still required
We may earn a commission when you buy through this link, at no additional cost to you.
The product description clearly identifies a three-prong connector, providing a decisive verification point. DSC Impassa replacements often use a two-prong plug, while this battery is aimed at Honeywell Lynx hardware. It states CE and RoHS certification and describes the pack as providing extended backup time. For someone with the correct Lynx equipment, those are useful features and a strong rating provides additional confidence.
It would be misleading to include this battery as a general ADT Command replacement. The list of supported systems is Honeywell and Lyric-oriented, and the connector design prevents it from being interchangeable with the two-prong Impassa packs or the Command-specific lithium-ion battery. Even within Lynx systems, the listing asks buyers to verify the device part number. The similar 7.2V output should not be used to infer fit.
Choose this battery if your panel is a Honeywell Lynx or Lyric product and the original pack is 300-03866 with a three-prong plug. It may be the right replacement even when the alarm is marketed through ADT because equipment branding and battery architecture are separate issues. It is not a suitable option for the ADT Command Smart Security Panel or a DSC Impassa system.
Connector-First Compatibility
The three-prong connector is the most important fit cue. Checking it against the old battery helps prevent confusion with visually similar 7.2V Ni-MH replacements that use different plug arrangements.
Broad Lynx System Coverage
The listing supports several Lynx, Lynx Touch, and Lyric identifiers. That makes it practical for owners of those named systems, provided the original part number and connector are confirmed.
We may earn a commission when you buy through this link, at no additional cost to you.
8. Futurebatt DSC Impassa Battery – Affordable Multi-Protection Rechargeable Pack
Futurebatt DSC Impassa Battery
7.2V rechargeable voltage
28.8Wh energy rating
Impassa 9057 support
Short-circuit protection
The Futurebatt battery has a 3.6 rating and targets ADT DSC IMPASSA 9057, SCW9055, SCW9057, BH7236-SS, 17000145, and 17000152 systems. It is rated at 7.2V and 28.8Wh. This watt-hour presentation is less familiar than the 3600mAh or 3700mAh capacity used by most competing listings, so buyers may need to convert or compare energy requirements rather than rely on capacity alone.
Pros
- Broad Impassa model identifiers
- Multiple electrical protections
- Energy rating clearly stated
- Thirty-day refund offered
- Twelve-month replacement coverage
Cons
- Lowest visible product rating
- Capacity expressed as watt-hours
- Not suitable for Command panel
We may earn a commission when you buy through this link, at no additional cost to you.
Its strongest points are the number of compatible identifiers and the extensive protection list. The description mentions overcharge, overdischarge, over-temperature, and short-circuit protection, along with high-quality materials and boards intended to support fast charging. A 30-day refund and 12-month replacement period are also stated, giving the listing a clear customer-service framework even though the product's visible rating is the lowest in the group.
The 3.6 rating warrants more caution than the higher ratings attached to alternatives. A low score can reflect a small number of reviews, fit issues, mixed expectations, or other factors that cannot be determined from the supplied data. It does not prove the battery is defective, but it makes exact compatibility verification and careful comparison with the original pack more important. It is also not a match for the ADT Command Smart Security Panel.
This battery is most appropriate for a user who has confirmed that the original DSC Impassa battery carries one of the listed identifiers and that the plug and dimensions fit. Its protection features and support terms may make it a practical option despite the lower visible rating. It should be evaluated as a compatible Impassa replacement, not as a Command panel solution.
Energy Stated in Watt-Hours
A 28.8Wh energy rating gives a different view of battery output than the milliamp-hour figures used by many competitors. Buyers should compare it with the panel's requirements and the original battery rather than treating it as interchangeable by appearance alone.
Comprehensive Protection Features
Overcharge, overdischarge, over-temperature, and short-circuit protections address common concerns in rechargeable alarm-system packs. These listed safeguards add useful context to the warranty and return information.
We may earn a commission when you buy through this link, at no additional cost to you.
9. DSC Impassa 3600mAh Battery – High-Rated Straightforward Panel Replacement
DSC Impassa 3600mAh Battery
7.2V Ni-MH voltage
3600mAh rated capacity
SCW9057G-433 support
6PH-H part-number match
This replacement has a perfect 5.0 visible rating and is specified for ADT DSC Impassa 9057, SCW9057, SCW9057G-433, and SCW9055 alarm control panels. It explicitly replaces part number 6PH-H-4/3A3600-S-D22 and uses a 7.2V, 3600mAh rechargeable Ni-MH configuration. It is one of the most directly framed replacements for a compatible Impassa installation.
Pros
- Perfect visible customer rating
- Direct replacement model list
- Clear part-number compatibility
- Simple installation description
- Twelve-month warranty stated
Cons
- No Command panel compatibility
- Perfect rating has limited context
- Physical connector still requires checking
We may earn a commission when you buy through this link, at no additional cost to you.
The installation information is refreshingly simple. The description says to remove the compartment cover, disconnect the old pack, and connect the new one, while noting identical dimensions for a direct fit. It also offers a 12-month warranty and customer support for compatibility or installation assistance. For a user comfortable with a straightforward battery swap, these details make the expected process easy to understand.
The 5.0 rating should still be interpreted within the limits of the visible feedback. A perfect average is encouraging, but it does not replace checking the connector, charging requirements, and battery dimensions against the installed pack. The product is not listed for the ADT Command Smart Security Panel and should not be selected for ADT5AIO or ADT7AIO equipment without documentation confirming otherwise.
For an SCW9057, SCW9057G-433, SCW9055, or Impassa 9057 owner, this is an excellent candidate because of its clear specifications, exact replacement identifier, straightforward installation description, and strong visible feedback. Command panel owners should use the purpose-built Command battery instead. As with any security-system battery, follow the panel's instructions and confirm compatibility before disconnecting the existing pack.
Exceptional Visible Feedback
The 5.0 rating is the strongest displayed score in the list. While a larger body of reviews would offer better context, the current feedback is highly favorable for a compatible panel owner.
Easy Compartment-Swap Design
The listed direct-fit dimensions and simple connection process make the replacement approachable. Buyers still need to observe normal safety precautions and follow the alarm panel's own service instructions.
We may earn a commission when you buy through this link, at no additional cost to you.
10. 17000152 Impassa Battery – Precisely Dimensioned Multi-Model Replacement
17000152 Impassa Battery
7.2V Ni-MH voltage
3600mAh rated capacity
25.92Wh energy rating
101 by 69.2mm
The 17000152 replacement has a 4.8 rating and is compatible with Impassa SCW9055, SCW9057, SCW9057G-433, and related Impassa wireless alarm systems. Its 7.2V, 3600mAh, 25.92Wh specifications are clearly stated alongside dimensions of 101.00 by 69.20 by 17.00mm and a weight of 303g. That combination of electrical and physical data makes it easy to compare with an installed battery.
Pros
- Strong 4.8 customer rating
- Precise physical measurements
- Four battery part references
- Broad safety protection list
- Clear compatibility reminder
Cons
- Not a Command panel replacement
- Connector requires model verification
- Limited visible review count
We may earn a commission when you buy through this link, at no additional cost to you.
The part-number coverage is another important strength. The description lists 17000145, 17000152, BH7236-SS, and OSA273, giving owners several identifiers to search for or compare. It also states that the battery has no memory effect and includes protection against overcharge, overdischarge, overheating, overcurrent, and short circuits. Those are relevant attributes for a rechargeable pack intended to remain connected to a charging circuit.
As with several other choices, this is not a direct replacement for the ADT Command Smart Security Panel. Its two-prong-style DSC pack format and 7.2V Ni-MH design are intended for the named Impassa equipment. The 4.8 rating is positive, although the visible number of ratings is small. More important than the score is whether the model, original part number, connector, and measurements all correspond to the panel being serviced.
This is a strong final option for owners of a compatible Impassa system because it combines an excellent rating with unusually precise dimensions and a broad set of part references. The explicit instruction to double-check the model and original part number is sensible. If your panel is an ADT5AIO, ADT7AIO, or other Command model, choose the dedicated Command replacement shown first rather than this DSC battery.
Measurement-First Buying Approach
The stated length, width, thickness, and weight allow a direct comparison with the existing battery. A physical fit check reduces the chance that a correct-looking pack will still be unsuitable.
Broad Safety Feature Coverage
The product description addresses five common rechargeable-battery concerns: memory effect, overcharge, overdischarge, overheating, overcurrent, and short-circuit behavior. The breadth of the claims makes the listing useful for buyers comparing protection features.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best Battery Replacement for Adt Command Smart Security Panel
The most important buying factor is exact compatibility with the installed alarm panel and its original battery. Voltage and chemistry come next, followed by connector design, dimensions, capacity, protection features, warranty, and seller support. Because similar-looking ADT systems can use fundamentally different batteries, verification should happen before ordering.
Identify the Exact Panel Model
Begin by finding the model printed on the front of the alarm panel, inside the battery compartment, or on the original battery label. The top-ranked Cameron Sino product specifically names ADT5AIO, ADT7AIO, and the Command Smart Security Panel, while many other options target DSC Impassa 9057 systems. An ADT logo alone does not establish that these are interchangeable, because ADT equipment can be supplied with panels made by DSC, Honeywell, or other manufacturers.
Match the panel model against the compatibility list before comparing capacity or connector shape. If the documentation identifies a Command Smart Security Panel, prioritize a replacement that expressly names the relevant Command variant.
Read the Original Part Number
The battery part number is often more precise than the consumer-facing system name. Relevant identifiers in this category include 6PH-H-4/3A3600-S-D22 for many DSC Impassa packs, 17000145 and 17000152 for compatible DSC systems, and 300-03866 for the Honeywell Lynx battery covered in the list. Search the compartment for a printed model and compare it character by character with the seller's listing.
Use the part number together with the other specifications rather than in isolation. Matching one identifier while overlooking voltage, plug type, or dimensions can still lead to an incompatible purchase.
Confirm Voltage and Chemistry
The Command-specific replacement listed here uses 3.7V lithium-ion chemistry, while the DSC Impassa and Honeywell Lynx options are 7.2V Ni-MH rechargeable packs. These are materially different electrical systems, and the higher nominal voltage of the Ni-MH products does not make them substitutes for the Command battery. A panel designed for one charging arrangement may not safely charge or communicate with the other.
Select the chemistry and voltage specified for your panel, and do not infer compatibility from a common ADT brand. If the old battery is missing or unreadable, obtain the panel model and consult the panel documentation before ordering.
Inspect the Connector and Plug
Connector design is one of the most useful physical checks. The NASTIMA DSC Impassa battery identifies a black two-prong plug, while the Honeywell Lynx replacement uses a three-prong connector. DSC packs also carry long part numbers such as 6PH-H-4/3A3600-S-D22, which can signal a different connection method from the compact Honeywell plug. Even a battery with the correct voltage can be unusable if its plug does not match.
Compare the number, shape, and position of the prongs and trace where the wiring attaches. Avoid forcing a connector, modifying wires, or using an adapter unless the manufacturer and alarm-system documentation explicitly permit it.
Measure the Battery Compartment
Use the listed dimensions to rule out a physical mismatch before buying. The Cameron Sino Command pack is listed at approximately 68.80 by 55.40 by 18.80mm, while the NASTIMA and 17000152 DSC packs measure roughly 101 by 69 by 17mm. The difference demonstrates why visual similarity or shared brand labeling is not enough. Cable routing, compartment depth, and plug clearance all matter.
Measure the installed battery and the space available for the replacement. If a pack requires compression, bending leads, or unusually tight placement, it may not be the correct configuration.
Evaluate Capacity and Runtime
Capacity can influence expected backup time, but a higher number is not automatically a better match. Most DSC options in this list provide 3600mAh, the NASTIMA option states 3700mAh, and the Command-specific battery lists 7800mAh at 3.7V. Some listings express energy in watt-hours, so direct comparison requires attention to both voltage and energy. The panel's charging circuit and design specifications remain more important than a marketing comparison.
Prefer a capacity that matches or reasonably exceeds the original manufacturer's specification while preserving the correct voltage, chemistry, dimensions, and connector. Do not choose a larger pack that the panel cannot charge properly.
Review Protections and Support
Useful listings identify overcharge, overdischarge, overcurrent, over-temperature, and short-circuit protection. The DSC replacements in this roundup variously mention these safeguards, while the Cameron Sino product lists FCC, CE, CB, ISO 8075, and RoHS certifications. Warranty and return language also varies, including stated 12-month replacement coverage, a 35-day money-back offer for NASTIMA, and a longer warranty claim for Cameron Sino.
Check current listing terms because policies and customer-support arrangements can change. Certification and protection claims are useful differentiators, but they should supplement—not replace—proper compatibility checks.
Use Ratings as Supporting Evidence
Visible ratings range from 3.6 to 5.0 across the list. The DSC Impassa replacement rated 5.0 and the ZZcell option rated 4.7 appear especially well regarded, while the Cameron Sino product has no published rating. A high score can help establish customer experience, although the number of underlying reviews and the possibility of fit-related feedback also matter.
Use ratings to distinguish otherwise credible products, not to overcome a compatibility mismatch. A five-star battery for the wrong panel is less useful than a well-reviewed option whose part number and connector exactly match the system.
How to Use and Care for Your Battery Replacement for Adt Command Smart Security Panel
Before replacing the battery, confirm that the system is not reporting an active alarm condition, then follow the panel manufacturer's instructions for service mode. Open the panel as directed, photograph the old battery and its wiring, and disconnect the existing pack according to the prescribed order. Do not puncture, crush, heat, short, or modify a lithium-ion battery, and never install a pack whose voltage, chemistry, or connector has not been verified.
Install the replacement in the same orientation and position as the original. Keep the connector fully seated, avoid pinched or sharply bent wires, and confirm that the compartment cover closes without pressing against the battery. For Ni-MH packs, use the charging arrangement specified for the panel rather than an unrelated charger. For a rechargeable Command lithium-ion pack, follow the relevant ADT or panel instructions and allow any prescribed initial charging period.
After installation, acknowledge or clear the panel's low-battery or fault condition according to its manual. Test the system through the proper service routine if required, observe that the panel no longer displays a battery fault, and confirm normal operation of the keypad, sensors, and communication indicators. Recycle the used battery through an appropriate battery-recycling program and periodically inspect the compartment for swelling, corrosion, heat, moisture, or a loose connection.
Frequently Asked Questions
What battery does the ADT Command Smart Security Panel use?
The most directly relevant option in this guide is a 3.7V, 7800mAh lithium-ion replacement listed for ADT5AIO, ADT7AIO, and the Command Smart Security Panel. However, ADT installations can contain panels from different manufacturers, so the panel model and battery label should be checked rather than relying on the service provider's brand alone. If the installed pack is a 7.2V Ni-MH DSC Impassa battery, choose a matching Impassa replacement instead.
Can I use a DSC Impassa battery in an ADT Command panel?
Do not assume that it will work merely because both systems may be associated with ADT. The DSC batteries in this guide are 7.2V Ni-MH packs, while the Command-specific battery is 3.7V lithium-ion. Voltage, chemistry, charging method, dimensions, and connector must all match. Use the Impassa options only for the explicitly listed DSC systems, and confirm any exception in the panel's official documentation.
How do I tell whether I need a two-prong or three-prong battery?
Remove the panel cover safely and inspect the old battery's plug without forcing it. The NASTIMA DSC Impassa replacement is described as having a black two-prong connector, while the Honeywell Lynx option uses a three-prong plug. Also compare the part number because plug appearance can be misleading. If the old battery is missing, identify the panel model and obtain its replacement specification before buying.
Is a higher-capacity replacement battery always better?
No. A higher capacity can be useful only when voltage, chemistry, connector, dimensions, and charging requirements remain compatible. A 7.2V Ni-MH pack cannot safely substitute for the 3.7V Command battery, and an oversized pack may not fit or charge properly. The original specifications and panel documentation are more reliable than comparing watt-hours or milliamp-hours alone.
Are these replacement batteries rechargeable?
The DSC Impassa and Honeywell Lynx options are specified as 7.2V Ni-MH rechargeable batteries. The Cameron Sino Command option is specified as a 3.7V lithium-ion battery. Rechargeable packs should be installed only in systems designed to recharge them, using the panel's intended charging arrangement. Do not place a rechargeable replacement in a compartment intended for a disposable alkaline battery.
Why do replacement battery listings show different certifications and warranties?
The products come from different sellers and manufacturers, so their stated certifications, customer-service periods, and warranty terms vary. The Cameron Sino listing cites FCC, CE, CB, ISO 8075, and RoHS, while several DSC products mention CE, RoHS, and electrical protections. These details can help compare quality policies, but current terms should be confirmed on the seller's listing before purchase.
What should I do if the new battery still triggers a low-battery warning?
First confirm that the replacement matches the required voltage, chemistry, connector, and part number. Check that the connector is fully seated and that the panel's low-battery fault has been cleared according to its manual. A panel may also need time to measure the new pack or complete a prescribed recharge cycle. If the warning continues, follow the manufacturer's troubleshooting steps and consider contacting ADT or a qualified alarm technician.
Can I recycle an old security-panel battery?
Yes, but it should go to an appropriate battery-recycling or household hazardous-waste program rather than general trash. Li-ion and Ni-MH batteries can contain materials that require controlled handling, and a damaged, swollen, leaking, or heated battery needs special handling. Keep terminals from contacting each other during transport and follow local recycling instructions.
Final Thoughts on Choosing the Best Battery Replacement for Adt Command Smart Security Panel
The Cameron Sino 7800mAh pack is the leading choice for a genuine ADT Command Smart Security Panel because it directly names ADT5AIO and ADT7AIO compatibility and provides a 3.7V lithium-ion configuration. For a compatible DSC Impassa installation, the NASTIMA and other 7.2V Ni-MH options provide relevant alternatives, with the NASTIMA pack standing out for its 3700mAh claim, detailed measurements, and explicit connector exclusions.
Compatibility should always take priority over capacity, rating, or brand recognition. Match the panel model, original part number, voltage, chemistry, connector, and physical dimensions before ordering. If your equipment is a Honeywell Lynx system with a three-prong plug, use the Lynx-specific option; if it is a DSC Impassa with the 6PH-H part number, select a matching Impassa pack rather than the Command battery.
Current prices, ratings, inventory, seller information, and warranty terms can change, so review the live product listing before making a final decision. Use the links in this guide to verify the latest compatibility statement and current terms. Taking a few minutes to identify the correct battery can help avoid an unnecessary return and keep the security panel operating as intended.